Wongdec Official Website

• Juicing/Blending:
  Cut the ingredients into chunks about 3–5 cm in size. Place them into the food processor bowl and press the “Pulse” button 2–3 times. Then press speed button “1” to blend until the desired consistency is achieved. Pour the desired amount of liquid (do not exceed 500cc) through the Lid Feed while blending.
• Smoothies:
  1. Place liquids or soft ingredients at the bottom of the food processor bowl, followed by harder ingredients and ice on top. If using large pieces, pre-cut them into 3–5 cm chunks.
  2. At first, press speed button “1”. If the ingredients are not moving, press the “Pulse” button 2–3 times to help break them up. Adding an appropriate amount of liquid helps speed up the blending process.
• Citrus Juicing, Shredding, Slicing, Julienne Cutting, Mixing:
  Ensure that all attachments are securely in place before use. These functions must use speed “2”
• Grinding/Processing:
  1. Dry ingredients such as grains or coffee can be ground directly. Use the “Pulse” button to control coarseness. Do not operate for more than 1 minute at a time.
  2. For oily ingredients such as peanuts or sesame seeds, do not grind for too long; excessive grinding can release oils, which may affect processing results.

• Do not use extension cords. Before plugging in the machine, ensure all components are properly assembled and securely locked in place.
• Never open the food processor bowl lid, reach into the bowl to retrieve ingredients, or attempt to touch the blade while the power plug is still connected.
• The recommended safe capacity for this product and its related series is 500–1000cc, depending on the model and actual usage. Overfilling is strictly prohibited.
• Never submerge the main unit in water. Do not wash any components with hot water.
• Keep the machine clean at all times. Do not leave it for extended periods in environments with heavy grease or cooking fumes. If dirt or foreign objects cause the machine to malfunction, resulting in product malfunction or damage, or physical or mental injury, the user shall bear full responsibility; Wongdec shall not be held liable.
• Do not place ingredients into the food processor bowl before securely installing the chopping blade at the bottom center of the bowl. Chopping blade must be installed first. If you cannot smoothly insert or remove the blade from the center shaft, stop using the machine immediately, unplug it, and contact Wongdec or an authorized service center for assistance.
• Wongdec provides paid replacement parts for three years for all products. Repairs will be carried out using currently manufactured or equivalent substitute parts. We apologize if we are unable to provide a substitute.
• The product’s motor has an overheat protection feature. If the motor becomes too hot, it will automatically shut off. Turn off the power, unplug the unit, and allow it to cool down (approximately one hour) before restarting.
• When using the citrus juicing, shredding, slicing, julienne, or mixing functions, ensure that all attachments are securely locked in place. Do not use speed “1” (high) or the “Automatic” setting.
• When using hot water, hot beverages, or when the food processor bowl is nearly full, always start from speed “2” (low) and gradually switch to speed “1” (high) or “Automatic” as needed. Pour with care after use to avoid burns. (Must be used with shatter-resistant, heat-resistant food processor bowl set.)
• If there is any switch malfunction, stop using the machine immediately, unplug it, and contact Wongdec or an authorized service center for assistance.
• If any parts (including the power cord or motor shaft) are damaged or cracked, if the machine malfunctions, or if any component becomes stuck in the unit, stop using the machine immediately and contact Wongdec or an authorized service center for assistance. Do not attempt to repair or disassemble it yourself. If continued use under such conditions results in product malfunction or damage, or physical or mental injury, the user shall bear full responsibility; Wongdec shall not be held liable.
• For safety reasons, and to prevent risks arising from product lifespan, component aging, environmental factors, natural phenomena, or other uncontrollable circumstances, if the machine has not been used for an extended period (three months or more) or has accumulated 45 hours of usage, contact Wongdec or an authorized service center for a safety inspection and maintenance before using it again.
• To ensure safe operation, it is recommended that the product be returned to Wongdec Industry Co., Ltd. for inspection and maintenance every six months from the date of purchase (a service fee may apply). If found to be no longer safe for use, replacement is recommended.
• If the machine is disassembled by anyone other than the personnel from an authorized service center designated by Wongdec, or if warranty seals are tampered with or damaged, the warranty will be void, and repair or warranty services may incur additional charges. If such misuse results in product malfunction or damage, or physical or mental injury, the user shall bear full responsibility; Wongdec shall not be held liable.
• For any warranty maintenance or other such problems after the warranty period has expired, the machine must be returned to the factory regularly for a safety inspection at the user’s expense. The same shall apply after the machine has accumulated 45 hours of usage or has not been used for an extended period (three months or more).

• Turn off the power. Firmly grip the pulp container handle, remove the container from the machine, and clean it before resuming operation.
• This machine can juice different types of vegetables simultaneously. Thanks to its unique design, flavors will not mix, so you don’t need to clean the unit after every use.
• To preserve fresh flavors and vitamins, it is recommended to drink the juice immediately after extraction. Juice can be stored for a short while by adding a small amount of lemon juice to maintain freshness.

• Turn the speed switch to “0” to power off the unit, then unplug it from the outlet.
• Remove the lid, pulp container, and filter.
• Discard the pulp, then rinse all parts with clean water.
• Soak the filter in water and use a soft brush to clean the filter.
• Do not immerse the motor in water. Simply wipe it gently with a damp cloth.

• Do not disassemble the machine while it is still plugged in.
• Always unplug the unit after use.

Before First Use

• Check that the voltage indicated on the machine matches your power supply.
• Carefully clean all parts that will come into contact with fruits and vegetables.

• Any damage resulting from incorrect power cord connection or improper input voltage will not be covered or serviced.
• If any electrical components are damaged, contact a service center authorized by Wongdec Industry Co., Ltd. to ensure your rights.

The filter is very delicate and must be handled with care to avoid damage. Follow the steps below for proper cleaning:

• Soak the filter in water and clean it with a soft brush such as a toothbrush. Do not place it in a dishwasher.
• If you find that the filter is damaged, replace it immediately. (Purchase a replacement from a service center authorized by Wongdec.)

• Wash and peel the fruits/vegetables, then cut them into small pieces before placing them into the juicer.
• Remove pits and cores from fruits such as peaches, papayas, and melons before juicing.
• Peel fruits such as oranges, lemons, grapefruits, and watermelons before juicing.
• When juicing fruits with thick peels, seeds, or high fiber content, clean the filter frequently.

To ensure safe operation, read the following instructions carefully:

• Do not use extension cords. Before plugging in and starting the machine, make sure all components are properly assembled and secured.
• Do not operate the machine until the blender jar lid is tightly secured.
• This machine is designed for cold, hot, and dry blending. The maximum safe capacity is 1 liter (1000cc).
• Never open the blender jar lid or reach into the jar to retrieve ingredients or touch the blade while the power plug is still connected.
• The machine is equipped with a high-speed motor and specialized stainless steel blade. Never insert your hands or any other objects into the blender jar while the machine is running.
• Do not open the blender jar lid during operation. If you need to pour out the contents, first unplug the machine and detach the jar from the main unit.
• Prolonged operation may cause the motor to overheat. The thermal protection switch will then automatically shut off the power to protect the motor. If this happens, turn the machine off and then unplug it. Allow the motor to cool in a shaded area for about 60 minutes; it will automatically resume functioning once cooled.
• When using hot water, do not exceed the maximum capacity. Handle with care to avoid burns.
• If any parts are cracked, damaged, or leaking, stop using the machine immediately. Do not attempt to repair it yourself. Contact Wongdec for assistance.
• If the power cord is cracked or damaged, stop using the machine. Do not attempt to repair it yourself; contact Wongdec’s technicians, designated service centers, or qualified professionals.
• The machine includes a Safety Switch, Motor Temperature Protection Switch, and Overload Protection Switch. To ensure continued safe use, it is recommended that the machine be returned to the factory for inspection and maintenance every six months after the purchase date (a service fee may apply). If the product is found to be unfit for use, replacement is advised.
• For any warranty maintenance or other such problems after the warranty period has expired, the machine must be returned to the factory regularly for a safety inspection at the user’s expense. The same shall apply after the machine has accumulated 45 hours of usage or has not been used for an extended period (three months or more).
• Wongdec reserves the final right of interpretation for all content, descriptions, and wording related to this product.

• To clean the blender jar, fill it with clean water, close and secure the lid, then press the “Pulse” button 3–5 times. Afterward, rinse thoroughly under running water.
• Wipe the main unit with a damp cloth. Do not rinse or submerge the main unit in water.
• After each use, remove and thoroughly clean the sealing ring on the lid of the blender jar.